{"id":1151,"date":"2020-02-26T09:16:30","date_gmt":"2020-02-26T03:46:30","guid":{"rendered":"http:\/\/www.fineflowtech.com\/?p=1151"},"modified":"2024-07-08T08:06:45","modified_gmt":"2024-07-08T02:36:45","slug":"peristaltic-pumps-advantages","status":"publish","type":"post","link":"https:\/\/www.fineflowtech.com\/?p=1151","title":{"rendered":"Peristaltic Pumps : Advantages"},"content":{"rendered":"
\n

How to Use a PERISTALTIC PUMP and its advantages.<\/strong><\/h3>\n
\"\"<\/div>\n<\/div>\n
\n
\n

Peristaltic pumps<\/strong> are volumetric pumps that operate on the basis of the peristalsis principle, which applies pressure to the fluid with an occlusion that runs along the hose. They consist of a rotor on which 2 or more rollers or pads rotate, a flexible elastic hose and an electric motor.<\/p>\n

The images below show a peristaltic pump with rollers.<\/p>\n

\"\"<\/p>\n

The first roller rolls against the hose, compressing it. This creates a vacuum that sucks (image 1) and pulls (image 2) the fluid.<\/p>\n

When the fluid reaches the delivery (image 3), the second roller restarts the process.<\/p>\n

HOSE<\/strong><\/h4>\n

This is the only part of the pump that comes into contact with the fluid and therefore it must be chemically compatible with the fluid as well as mechanically resistant to the rubbing and squeezing action.
\nThe fundamental characteristic of the hose is its elasticity, which allows the hose to be deformed and to return to its original shape, because it ensures its long life and recreates the suction conditions.
\nThe hose is usually made of silicone and\/or PVC materials.<\/p>\n

ROLLERS<\/strong><\/h4>\n

These are the mechanical elements that press the fluid.
\nThere may be 2 to maximise the flow rate, or more, to minimise the pulsation of the fluid pumped, at the expense of flow rate.<\/p>\n

USES OF PERISTALTIC PUMPS<\/strong><\/h4>\n

Peristaltic pumps are used in processes that require that the fluid does not come into contact with the pump (dangerous fluids that must not be contaminated, etc.) or in applications with highly viscous fluids or with a great deal of suspended solids, which are therefore difficult to move.
\nThis type of pump allows the flow rate to be calibrated, which renders it suitable for dosing processes, as gear motors can be applied to select the number of RPMs.<\/p>\n

ADVANTAGES:<\/strong><\/h4>\n