PNEUMATIC DRUM TRANSFER
The Drum Transfer Pump consist of a dip tube at the end of which the open impeller is housed, fixed on the drive shaft connected to the pump by means of a ring nut, while the transmission takes place through a transmission joint. The operation is given by the impeller, which is integral with the shaft, and is connected to the electric or pneumatic motor, by means of a coupling, which rotates it, creating the centrifugal effect.
The transfer pumps must be used exclusively vertically and with the pump immersed in the fluid. Dry-running or the presence of air bubbles could damage the shaft guide internal bushing. Portable drum transfer pump is ideally suited for pumping corrosive fluids and work by being immersed in the liquid. Their construction has been designed specifically to ensure that any product spillages are collected in the drum.
MODELS
- TRA PNEUMATIC MOTOR
- TRF PNEUMATIC MOTOR
- TRP PNEUMATIC MOTOR
ELECTRIC DRUM TRANSFER
Drum transfer pump with electric motor is fitted with an 800 watt (10500 RPM) motor and open impeller. This combination allows the pump to produce flow rates up to 90 litre/minute, with a continuous flow of clean corrosive fluids with an apparent viscosity up to 900 cps. The motor also features a safety switch that prevents the pump from restarting accidentally in case of power outages.
ACCESSORIES
